View CBL3225T100KR_4550695.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

notice_e-01 notice for taiyo yuden products please read this notice before using the taiyo yuden products. reminders product information in this catalog is as of october 2011. all of the contents speci?ed herein are subject to change wi thout notice due to technical improvements, etc. therefore, please check for the latest information carefully be - fo r e practical application or usage of the products. p lease note that taiyo yuden co., ltd. shall not be responsible for any defects in products or equipment incorpo - r a ting such products, which are caused under the conditions other than those speci?ed in this catalog or individual s p eci?cation. please contact taiyo yuden co., ltd. for further details of product speci?cations as the individual speci?cation is a v ailable. please conduct validation and veri?cation of products in actual condition of mounting and operating environment b e fore commercial shipment of the equipment. all electronic components or functional modules listed in this catalog are developed, designed and intended for u s e in general electronics equipment.(for av, office automation, household, office supply, information service, t e lecommunications, ( such as mobile phone or pc) etc.). before incorporating the components or devices into any equipment in the ?eld such as transportation,( automotive control, train control, ship control), transportation signal, d i saster prevention, medical, public information network (telephone exchange, base station) etc. which may have d i rect in?uence to harm or injure a human body, please contact taiyo yuden co., ltd. for more detail in advance. d o not incorporate the products into any equipment in ?elds such as aerospace, aviation, nuclear control, subma - r i ne system, military, etc. where higher safety and reliability are especially required. i n addition, even electronic components or functional modules that are used for the general electronic equipment, i f the equipment or the electric circuit require high safety or reliability function or performances, a suf?cient reliabil - i t y evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to i n stall a protective circuit is strongly recommended at customer's design stage. the contents of this catalog are applicable to the products which are purchased from our sales of?ces or distribu - t o rs (so called t a iyo yuden s of?cial sales channel ). it is only applicable to the products purchased from any of taiyo yuden s o f ?cial sales channel. please note that taiyo yuden co., ltd. shall have no responsibility for any controversies or disputes that may oc - c u r in connection with a third party's intellectual property rights and other related rights arising from your usage of p r oducts in this catalog. taiyo yuden co., ltd. grants no license for such rights. caution for export c ertain items in this catalog may require speci?c procedures for export according to f o reign exchange and for - eign trade control law o f japan, u.s. export administration regulations , and other applicable regulations. should you have any question or inquiry on this matter, please contact our sales staff.
72 wound02_e-02 features ordering code external dimensions/standard quantity available inductance range applications this catalog contains the typical speci?cation only due to the limitation of space. when you consider the purchase of our products, please check our speci?cation. for details of each product (characteristics graph, reliability information, precautions for use, and so on), see our web site (http://www.ty-top.com/) or cd catalogs. recommended land patterns surface mounting ? mounting and soldering con- mounting and soldering con - ditions should be checked beforehand. ? applicable so ldering process to those products is re?ow so ldering only. ? r ecommended land patterns cb-series are wound chip inductors having wide line-up, which are suitable for any circuit designs. ? cbc series has large rated current. they contribute to the miniatur - iz ation of the power supply circuit. ? cb l series has low pro?le characteristic. they contribute to the low - e r ing of the equipments. ? cb mf series has a low loss characteristic. wire-wound chip power inductors ( cb series ) c b 2 0 1 2 t 1 0 0 ? ? ? ? ? ? ? ? ? type cb wound chip power inductor ? internal code ? special code standard pr oducts r low rdc t y pe ? external dimensions mm 1608 0603 1 .6 0.8 2012 0 805 2 .0 1.25 2016 0 806 2 .0 1.6 2518 1 007 2 .5 1.8 3225 1 210 3 .2 2.5 ? nominal inductance h e x ample 1r0 1 100 10 101 100 r=decimal point ? characteristic spec standard c high current l l o w pro?le m f l ow loss ? inductance tolerances k 10 m 20 ? packaging t tape & reel aa c b 3&'-08 operating temp. ? they are suitable for an anti-noise measure on the power supply circuit of dsc, dvc, hdd, lcd-tv, mobile phones,pc, game equipments, various communication equipments and etc.. ? 40 105 in cluding-self-generated heat unit mm type a b c mf1608 0.55 0.7 1.0 2012 0.60 1 . 0 1.45 20 16 0.60 1 . 0 1.8 25 18 0.60 1 . 5 2.0 32 18 0.85 1 . 7 2.0 32 25 0.85 1 . 7 2.7 type l w t e standard quantity [pcs] p a per tape embossed t a pe cbmf1608 1.6 0.2 0.063 0.008 0.8 0.2 0.031 0.008 0.8 0.2 0.031 0.008 0.45 0.15 0.016 0.006 3000 cbl2012 2.0 0.2 0.079 0.008 1.25 0.2 0.049 0.008 0.9 0.1 0.035 0.004 0.5 0.2 0.020 0.008 4000 cb2012 cbc2012 2.0 0.2 0.079 0.008 1.25 0.2 0.049 0.008 1.25 0.2 0.049 0.008 0.5 0.2 0.020 0.008 3000 cb2016 cbc2016 2.0 0.2 0.079 0.008 1.6 0.2 0.063 0.008 1.6 0.2 0.063 0.008 0.5 0.2 0.020 0.008 2000 cb2518 cbc2518 2.5 0.2 0.098 0.008 1.8 0.2 0.071 0.008 1.8 0.2 0.071 0.008 0.5 0.2 0.020 0.008 2000 cbc3225 3.2 0.2 0.126 0.008 2.5 0.2 0.098 0.008 2.5 0.2 0.098 0.008 0.6 0.3 0.024 0.012 1000 unit mm inch range type cbmf1608 cbl2012 cb2012 cbc2012 cb2016 cbc2016 cb2518 cbc2518 cbc3225 inductance ? h 1 imax ma ? rdc 30 ?? imax ma rdc 30 ?? imax ma rdc 30 ?? imax ma rdc 30 ?? imax ma rdc 30 ?? imax ma ? rdc 30 ?? imax ma ? rdc 30 ?? imax ma rdc 30 ?? imax ma rdc 30 ?? 290 1 h 0.09 620 1 h 0.15 500 1 h 0.15 700 1 h 0.19 600 1 h 0.09 1100 1 h 0.1 1200 1 h 0.06 1000 1 h 0.08 1440 1 h 0.055 2.2 190 0.17 440 0.39 410 0.23 530 0.33 510 0.13 720 0.2 510 0.09 890 0.13 1130 0.08 10 115 0.36 205 1.0 190 0.7 240 1.2 250 0.5 350 0.82 250 0.25 480 0.36 900 0.133 47 50 2.5 100 4.2 90 3.7 120 5.8 110 2.4 150 4.3 110 0.95 240 1.90 390 0.67 100 47 h 47 h 60 7 47 h 70 4.5 110 8 60 2.1 160 3.7 270 1.4 1000 100 h 100 h 100 h 25 24 60 28 100 13 680 h 1000 h 1000 h
73 wound02_e-02 inductors ? power inductors part numbers this catalog contains the typical speci?cation only due to the limitation of space. when you consider the purchase of our products, please check our speci?cation. for details of each product (characteristics graph, reliability information, precautions for use, and so on), see our web site (http://www.ty-top.com/) or cd catalogs. 1608 0603 type ordering code ehs environmental hazar dous substances inductance h inductance to lerance self-resonant frequency mhz min. resistance dc 3 0 rated curr ent ma measuring fr e quency mhz s a turation current idc1 temperature rise curr ent idc2 c b mf1608t1r0m rohs 1.0 20% 10 0 0.09 290 770 7.96 cbmf1608t2r2m rohs 2.2 80 0.17 190 560 cbmf1608t3r3m rohs 3.3 60 0.22 170 500 cbmf1608t4r7m rohs 4.7 45 0.24 145 470 cbmf1608t100 rohs 10 1 0% 20% 32 0.36 115 380 2 . 52 cbmf1608t220 rohs 22 16 1.0 70 230 cbmf1608t470 rohs 47 11 2.5 50 140 ? please specify the inductance tolerance code or ? 2012(0805)type 2016 0 806 t ype ordering code ehs environmental hazar dous substances inductance h inductance to lerance self-resonant frequency mhz min. resistance dc 3 0 rated curr ent ma measuring fr e quency mhz s a turation current idc1 temperature rise curr ent idc2 c b 2 012t1r0m rohs 1 . 0 20% 1 0 0 0.15 500 900 7.96 cb 2012t2r2m rohs 2 . 2 80 0.23 410 770 cb 2012t3r3m rohs 3 . 3 55 0.30 330 650 cb 2012t4r7m rohs 4.7 45 0.40 300 580 cb 2012t6r8m rohs 6.8 38 0.47 250 540 cb 2012t100 rohs 10 1 0% 20% 32 0.70 190 440 2.52 cb 2012t100 r rohs 10 32 0.50 200 520 cb 2012t150 rohs 15 28 1.3 170 320 cb 2012t220 rohs 22 16 1.7 135 280 cb 2012t470 rohs 47 11 3.7 90 190 cb 2012t680 rohs 68 1 0 6.0 70 140 cb 2012t101 rohs 1 0 0 8 7.0 60 130 0.796 ? please specify the inductance tolerance code or ? ordering code ehs environmental hazar dous substances inductance h inductance to lerance self-resonant frequency mhz min. resistance dc 3 0 rated curr ent ma measuring fr e quency mhz s a turation current idc1 temperature rise curr ent idc2 c b 2 016t1r0m rohs 1 . 0 20% 1 0 0 0.09 600 1100 7.96 cb 2016t1r5m rohs 1 . 5 80 0.11 550 1000 cb 2016t2r2m rohs 2 . 2 70 0.13 510 1000 cb 2016t3r3m rohs 3.3 55 0.20 400 800 cb 2016t4r7m rohs 4.7 45 0.25 340 740 cb 2016t6r8m rohs 6.8 38 0.35 300 600 cb 2016t100 rohs 10 1 0% 20% 32 0.50 250 520 2.52 cb 2016t150 rohs 15 28 0.70 210 440 cb 2016t220 rohs 22 16 1.0 165 370 cb 2016t330 rohs 33 14 1.7 130 270 cb 2016t470 rohs 47 11 2.4 110 240 cb 2016t680 rohs 6 8 1 0 3.0 90 210 cb 2016t101 rohs 1 0 0 8 4.5 70 170 0.796 ? please specify the inductance tolerance code or ? t he saturation current value i dc1 is the dc current value having inductance decrease down to 30%. at 20 the temperature rise current value i dc2 is the dc current value having temperature increase up to 40 . at 20 ordering code ehs environmental hazar dous substances inductance h inductance to lerance self-resonant frequency mhz min. resistance dc 3 0 rated curr ent ma measuring fr e quency mhz s a turation current idc1 temperature rise curr ent idc2 c b c 2012t1r0m rohs 1 . 0 20% 1 0 0 0.19 700 840 7.96 cb c2012t2r2m rohs 2.2 70 0.33 530 640 cb c2012t4r7m rohs 4.7 45 0.50 360 520 cb c2012t100 rohs 10 10% 20% 40 1.2 240 340 2.52 cb c2012t220 rohs 2 2 1 6 3.7 170 190 cb c2012t470 rohs 4 7 11 5.8 120 150 ? please specify the inductance tolerance code or ? ordering code ehs environmental hazar dous substances inductance h inductance to lerance self-resonant frequency mhz min. resistance dc 3 0 rated curr ent ma measuring fr e quency mhz s a turation current idc1 temperature rise curr ent idc2 c b l 2012t1r0m rohs 1 . 0 20% 100 0.15 620 950 0.1 cb l2012t2r2m rohs 2.2 80 0.39 440 590 cb l2012t4r7m rohs 4.7 45 0.66 275 490 cb l2012t100m rohs 10 32 1.0 205 370 cb l2012t220m rohs 2 2 2 3 2.1 150 250 cb l2012t470m rohs 4 7 11 4.2 100 140 ? please specify the inductance tolerance code or ?
74 wound02_e-02 part numbers this catalog contains the typical speci?cation only due to the limitation of space. when you consider the purchase of our products, please check our speci?cation. for details of each product (characteristics graph, reliability information, precautions for use, and so on), see our web site (http://www.ty-top.com/) or cd catalogs. ordering code ehs environmental hazar dous substances inductance h inductance to lerance self-resonant frequency mhz min. resistance dc 3 0 rated curr ent ma measuring fr e quency mhz s a turation current idc1 temperature rise curr ent idc2 c b c 2016t1r0m rohs 1 . 0 20% 1 0 0 0.10 1100 1100 7.96 cb c2016t1r5m rohs 1.5 80 0.15 1000 1000 cb c2016t2r2m rohs 2.2 70 0.20 750 720 cb c2016t3r3m rohs 3.3 55 0.27 600 610 cb c2016t4r7m rohs 4.7 45 0.37 550 530 cb c2016t6r8m rohs 6.8 38 0.59 450 450 cb c2016t100 rohs 10 1 0% 2 0 % 32 0.82 380 350 2.52 cb c2016t150 rohs 15 28 1.2 300 300 cb c2016t220 rohs 22 16 1.8 250 240 cb c2016t330 rohs 33 14 2.8 220 220 cb c2016t470 rohs 47 11 4.3 150 150 cb c2016t680 rohs 6 8 1 0 7.0 130 130 cb c2016t101 rohs 1 0 0 8 8.0 110 110 0.796 ? please specify the inductance tolerance code or ? 2518 1007 t ype ordering code ehs environmental hazar dous substances inductance h inductance to lerance self-resonant frequency mhz min. resistance dc 3 0 rated curr ent ma measuring fr e quency mhz s a turation current idc1 temperature rise curr ent idc2 c b 2 518t1r0m rohs 1 . 0 20% 1 0 0 0.06 1200 1500 7.96 cb 2518t1r5m rohs 1 . 5 80 0.07 650 1400 cb 2518t2r2m rohs 2 . 2 68 0.09 510 1300 cb 2518t3r3m rohs 3.3 54 0.11 440 1200 cb 2518t4r7mr rohs 4.7 46 0.10 310 1200 cb 2518t4r7m rohs 4.7 46 0.13 340 1100 cb 2518t6r8m rohs 6.8 38 0.15 270 930 cb 2518t100 rohs 10 10% 2 0% 30 0.25 250 820 2.52 cb 2518t150 rohs 15 23 0.32 180 650 cb 2518t220 rohs 22 19 0.50 165 580 cb 2518t330 rohs 33 15 0.70 130 460 cb 2518t470 rohs 47 12 0.95 110 420 cb 2518t680 rohs 68 9.5 1.5 70 310 cb 2518t101 rohs 100 9.0 2.1 60 260 0.796 cb 2518t151 rohs 150 7.0 3.2 55 210 cb 2518t221 rohs 220 5.5 4.5 50 180 cb 2518t331 rohs 330 4.5 7.0 40 140 cb 2518t471 rohs 470 3.5 10 35 120 cb 2518t681 rohs 6 8 0 3.0 17 30 90 cb 2518t102 rohs 1 0 00 2.4 24 25 75 0.252 ? please specify the inductance tolerance code or ? ordering code ehs environmental hazar dous substances inductance h inductance to lerance self-resonant frequency mhz min. resistance dc 3 0 rated curr ent ma measuring fr e quency mhz s a turation current idc1 temperature rise curr ent idc2 c b c 2518t1r0m rohs 1 . 0 20% 100 0.08 1000 1200 7.96 cb c2518t1r5m rohs 1 . 5 80 0.11 950 1190 cb c2518t2r2m rohs 2 . 2 68 0.13 890 1100 cb c2518t3r3m rohs 3.3 54 0.16 730 1020 cb c2518t4r7m rohs 4.7 41 0.20 680 920 cb c2518t6r8m rohs 6.8 38 0.30 550 740 cb c2518t100 rohs 10 1 0% 20% 30 0.36 480 680 2.52 cb c2518t150 rohs 15 23 0.65 350 500 cb c2518t220 rohs 22 19 0.77 320 460 cb c2518t330 rohs 33 15 1.5 270 320 cb c2518t470 rohs 47 12 1.9 240 290 cb c2518t680 rohs 68 9.5 2.8 200 200 cb c2518t101 rohs 100 9.0 3.7 160 170 0.796 cb c2518t151 rohs 150 7.0 6.1 140 130 cb c2518t221 rohs 220 5.5 8.4 115 110 cb c2518t331 rohs 330 4.5 12.3 100 90 cb c2518t471 rohs 4 7 0 3.5 22 80 70 cb c2518t681 rohs 6 8 0 3.0 28 65 60 ? please specify the inductance tolerance code or ? t he saturation current value i dc1 is the dc current value having inductance decrease down to 30%. at 20 the temperature rise current value i dc2 is the dc current value having temperature increase up to 40 . at 20
75 wound02_e-02 inductors ? power inductors part numbers electrical characteristics this catalog contains the typical speci?cation only due to the limitation of space. when you consider the purchase of our products, please check our speci?cation. for details of each product (characteristics graph, reliability information, precautions for use, and so on), see our web site (http://www.ty-top.com/) or cd catalogs. 3225 1210 type ordering code ehs environmental hazar dous substances inductance h inductance to lerance self-resonant frequency mhz min. resistance dc 3 0 rated curr ent ma measuring fr e quency mhz s a turation current idc1 temperature rise curr ent idc2 c b c 3225t1r0mr rohs 1 . 0 20% 2 5 0 0.055 2000 1440 0.1 cb c3225t1r5mr rohs 1 . 5 220 0.060 2000 1310 cb c3225t2r2mr rohs 2 . 2 190 0.080 2000 1130 cb c3225t3r3mr rohs 3.3 160 0.095 2000 1040 cb c3225t4r7mr rohs 4.7 70 0.100 1250 1010 cb c3225t6r8mr rohs 6.8 50 0.120 950 940 cb c3225t100r rohs 10 1 0% 20% 23 0.133 900 900 cb c3225t150 r rohs 15 20 0.195 730 850 cb c3225t220r rohs 22 17 0.27 620 780 cb c3225t330r rohs 33 13 0.41 500 570 cb c3225t470r rohs 47 10 0.67 390 480 cb c3225t680 r rohs 68 8 1 .0 320 410 cb c3225t101 r rohs 1 0 0 6 1.4 270 340 cb c3225t221r rohs 220 3 2.5 190 190 cb c3225t821r rohs 820 1.8 12 110 110 cb c3225t102r rohs 1000 1.6 13 100 100 ? please specify the inductance tolerance code or ? t he saturation current value i dc1 is the dc current value having inductance decrease down to 30%. at 20 the temperature rise current value i dc2 is the dc current value having temperature increase up to 40 . at 20 dc bias characteristics measured by hp4285a 42841a inductance h dc bias ma cbmf1608 11 0 1 10 100 100 1000 100? 4r7m 1r0m inductance h dc bias ma cbl2012 11 0 1 10 100 100 1000 470m 100m 4r7m inductance h dc bias ma cb2012 11 0 0.1 1 10 1000 100 100 10000 1000 1r0m 101? 100? inductance h dc bias ma cbc2016 11 0 0.1 1 10 1000 100 100 10000 1000 1r0m 101? 100? inductance h dc bias ma cb2016 11 0 0.1 1 10 1000 100 100 10000 1000 1r0m 101? 100? inductance h dc bias ma cb2518 11 0 0.1 1 10 1000 100 100 10000 1000 1r0m 101? 100? inductance h dc bias ma cbc2518 11 0 0.1 1 10 1000 100 100 10000 1000 1r0m 101? 100? inductance h dc bias ma cbc2012 11 0 0.1 1 10 100 100 1000 1r0m 470? 100? inductance h dc bias ma cbc3225 11 0 0.1 1 10 100 1000 100 10000 1000 1r0mr 101?r 102?r 100?r
wound0103_reli-prp1 wound0103_reli_e-01 packaging this catalog contains the typical speci?cation only due to the limitation of space. when you consider the purchase of our products, please check our speci?cation. for details of each product (characteristics graph, reliability information, precautions for use, and so on), see our web site (http://www.ty-top.com/) or cd catalogs. tape material taping dimensions ? embossed tape 0.315 inches wide ? card board carrier tape 0.315 inches wide type chip cavity insertion pitch tape thickness a b f t k lbm 2016 1 . 75 0.1 0.069 0.004 2.1 0.1 0.083 0.004 4.0 0.1 0.157 0.004 0.3 0.05 0.012 0.002 1.9max. 0.075max. lem 2520 2.3 0.1 0.091 0.004 2.7 0.1 0.106 0.004 4.0 0.1 0.157 0.004 0.3 0.05 0.012 0.002 2.1 0.1 0.083 0.004 lbc3225/ cbc3225 2.8 0.1 0.110 0.004 3.5 0.1 0.138 0.004 4.0 0.1 0.157 0.004 0.3 0.05 0.012 0.002 4.0max. 0.157max. lb3218 2.1 0.1 0.083 0.004 3.5 0.1 0.138 0.004 4.0 0.1 0.157 0.004 0.3 0.05 0.012 0.002 2.2max. 0.087max. lb2518 / cb2518 l b c2518 / cbc2518 l b r2518 2.15 0.1 0.085 0.004 2.7 0.1 0.106 0.004 4.0 0.1 0.157 0.004 0.3 0.05 0.012 0.002 2.2max. 0.087max. lb2016/ cb2016 lbc2016 / cbc2016 1.75 0.1 0.069 0.004 2.1 0.1 0.083 0.004 4.0 0.1 0.157 0.004 0.3 0.05 0.012 0.002 1.9max. 0.075max. lb2012 / cb2012 lbc2012 / cbc2012 lbr2012 1.45 0.1 0.057 0.004 2.25 0.1 0.089 0.004 4.0 0.1 0.157 0.004 0.25 0.05 0.010 0.002 1.45max. 0.057max. cbl2012 1.55 0.1 0.061 0.004 2.3 0.1 0.091 0.004 4.0 0.1 0.157 0.004 1.1max. 0.043max. 1.1max. 0.043max. lb1608 1.0 0.1 0.039 0.004 1.8 0.1 0.071 0.004 4.0 0.1 0.157 0.004 1.1max. 0.043max. 1.1max. 0.043max. lbmf1608 / c b mf1608 1.1 0.1 0.043 0.004 1.9 0.1 0.075 0.004 4.0 0.1 0.157 0.004 0.25 0.05 0.010 0.002 1.2max. 0.047max. unit mm inch minimum quantity type standard quantity pcs papar tape e m bossed tape lb c3225/cbc3225 ` 1000 lb3218 ` 2000 lbr2518/lbc2518/lb251 /cb2518/cbc2518/lem2520 ` 2000 lbm2016/lbc2016/ lb2016 /cb2016/cbc2016 ` 2000 lb2012/lbc2012/lbr202 /cb2012/cbc2012 ` 3000 cbl2012 4000 ` lb1608 4000 ` lbmf1608/cbmf1608 ` 3000 ?embossed tape leader and blank portion (10 pitches or more) (10 pitches or more) (5.9 inches or mo re ) 150mm or more reel size the top tape requires a peel-off force 0.2 to 0.7n in the direction of the arrow as illustrated below. top tape strength pull direction 10.0 ? 1.5 (0.394 ? 0.059) 180 7.09 ) 0 3 0 0.118 60 2.36 ) 1 0 0.039 0 2.5 max 0.098
wound0103_reli-prp2 wound0103_reli_e-01 reliability data this catalog contains the typical speci?cation only due to the limitation of space. when you consider the purchase of our products, please check our speci?cation. for details of each product (characteristics graph, reliability information, precautions for use, and so on), see our web site (http://www.ty-top.com/) or cd catalogs. 1.operating temperature range lb, lbc, lbr, lbmf series ` 40 105 including self-generated heat cb, cbc, cbl, cbmf series lbm series lem series ` 4 0 85 2.storage lb, lbc, lbr, lbmf series ` 40 85 cb, cbc, cbl, cbmf series lbm, lem series te st methods and remarks please r efer the term of "7. storage conditions" in pr ecautions. 3.rated current lb, lbc, lbr, lbmf series within the speci?ed tolerance cb, cbc, cbl, cbmf series lbm, lem series te st methods and remarks lem series the maximum dc value having inductance decr ease within 10 and temperatur e increase within 20 by the application of dc bias. 4.inductance lb, lbc, lbr, lbmf series within the speci?ed tolerance cb, cbc, cbl, cbmf series lbm, lem series te st methods and remarks lem series measuring equipment lcr meter hp4285a 42851a or its equivalent measuring fr equency speci?ed fr equency lb ? lbc ? lbr ? cb ? cbc ? cbl ? lbmf ? cbmf ? lbm series measuring equipment lcr mater hp4285a or its equivalent 5.q lb, lbc, lbr, lbmf series cb, cbc, cbl, cbmf series lbm, lem series within the speci?ed tolerance te st methods and remarks lem series measuring equipment lcr meter hp4285a 42851a or its equivalent measuring fr equency speci?ed fr equency lbm series measuring equipment lcr mater hp4285a or its equivalent 6.dc resisitance lb, lbc, lbr, lbmf series within the speci?ed tolerance cb, cbc, cbl, cbmf series lbm, lem series te st methods and remarks measuring equipment dc ohmmeter hioki 3227 or its equivalent 7.self-resonant frequency lb, lbc, lbr, lbmf series within the speci?ed tolerance cb, cbc, cbl, cbmf series lbm, lem series te st methods and remarks measuring equipment impedance analyzer hp4291a or its equivalent 8.temperature characteristic lbm2016 lem2520 inductance change:within5 lb1608 lb2012 lbr2012 cb2012 cbl2012 lb2016 cb2016 lb2518 lbr2518 cb2518 lbc3225 cbc3225 inductance change:within20 lbmf1608 cbmf1608 lbc2016 cbc2016 lbc2518 cbc2518 lb3218 inductance change:within 25 lbc2012 cbc2012 inductance change:within 35 test methods and remarks change of maximum inductance deviation in step 1-5 lb, cb series step 1 2 3 4 5 temperture 20 ` 40 20 reference temperature 85 maximum operating temperature 20 lem2520 step 1 2 3 4 5 temperture 20 ` 25 20 reference temperature 85 maximum operating temperature 20 9.rasistance to flexure of substrate lb, lbc, lbr, lbmf series no damage. cb, cbc, cbl, cbmf series lbm, lem series te st methods and remarks w arp 2mm lb ? lbc ? lbr ? cb ? cbc ? cbl ? lbm ? lbmf ? cbmf series pressing jig board lb ~ lbmf ~ cbmf1608 y 0.8mm others 1.0mm lem2520 1.6mm 3mm lem2520 test substrate: board according to jis c0051
wound0103_reli-prp3 wound0103_reli_e-01 reliability data this catalog contains the typical speci?cation only due to the limitation of space. when you consider the purchase of our products, please check our speci?cation. for details of each product (characteristics graph, reliability information, precautions for use, and so on), see our web site (http://www.ty-top.com/) or cd catalogs. 10.body strength lb, lbc, lbr, lbmf series no damage. cb, cbc, cbl, cbmf series lbm, lem series te st methods and remarks lb ? lbc ? lbr ? cb ? cbc ? cbl ? lbm ? lem2520 applied for ce 10n duration 10sec. lb1608 ? lbmf1608 ? cbmf1608 applied for ce 5n duration 10sec. 11.adhesion of terminal electrode lb, lbc, lbr, lbmf series no abnormality. cb, cbc, cbl, cbmf series lbm, lem series te st methods and remarks lb ? lbc ? lbr ? cb ? cbc ? cbl ? lbm ? lbmf ? cbmf ? lem2520 applied force 10n to x and y directions duration 5 sec. t est substrate printed boar d lb1608 ? cbmf1608 ? lbmf1608 applied for ce 5n to x and y dir ections duration 5 sec. t est substrate printed boar d 12.resistance to vibration lb, lbc, lbr, lbmf series inductance change:within 10 no signi?cant abnormality in appearance. cb, cbc, cbl, cbmf series lbm, lem series inductance change:within 5 no signi?cant abnormality in appearance. t est methods and remarks lem ? lb ? lbc ? lbr ? cb ? cbc ? cbl ? lbm ? lbmf ? cbmf accor ding to jis c5102 clause 8.2. vibration type a dir e ctions 2 hrs each in x, y and z dir ections. t otal 6 hrs frequency range 10 to 55 to 10 hz 1min. amplitude 1.5mm mounting method soldering onto printed boar d recovery at least 2 hrs of r ecovery under the standar d condition after the test, followed by the measurement within 48 hrs. lem recovery at least 1 hr of r ecovery under the standar d condition after the test, followed by the measur ement within 2 hrs. 13.drop test lb, lbc, lbr, lbmf series cb, cbc, cbl, cbmf series lbm series lem series inductance change:within 5 n o signi?cant abnormality in appearance. t est methods and remarks lem acceleration 9 80m/sec2 duration 6msec number of times 6 sides 3 times mounting method soldering onto printed boar d recovery at least 2 hrs of r ecovery under the standar d condition after the test, followed by the measurement within 48 hrs. lem recovery at least 1 hr of r ecovery under the standar d condition after the test, followed by the measur ement within 2 hrs. 14.solderability lb, lbc, lbr, lbmf series at least 90 of surface of terminal electr ode is cover ed by new cb, cbc, cbl, cbmf series lbm, lem series te st methods and remarks lem solder temperatur e 230 5 duration 5 0.5sec. flux methanol solution with 25 of colophony lb ? lbc ? lbr ? cb ? cbc ? cbl ? lbm ? lbmf ? cbmf solder temperatur e 245 5 duration 5 0.5sec flux methanol solution with 25 of colophony
wound0103_reli-prp4 wound0103_reli_e-01 reliability data this catalog contains the typical speci?cation only due to the limitation of space. when you consider the purchase of our products, please check our speci?cation. for details of each product (characteristics graph, reliability information, precautions for use, and so on), see our web site (http://www.ty-top.com/) or cd catalogs. 15.resistance to soldering lb, lbc, lbr, lbmf series inductance change:within 10 cb, cbc, cbl, cbmf series lem series inductance change:within 5 lem2520 no signi?cant abnormality in appearance. t e st methods and remarks lem re?ow condition 3 times of r e ?ow over at 220 5 for 40sec. max, with peak temperatur e at 240 5 for 5 sec. max. refer to a pr o?le of chart below . flow condition solder temperature 260 5 duration 10 1sec. once lb ? lbc ? lbr ? cb ? cbc ? cbl ? lbm ? lbmf ? cbmf 3 times of r e?ow oven at 230 min for 40sec. with peak temperatur e at 260 for 5sec. 16.resisitance to solvent lb, lbc, lbr, lbmf series no signi?cant abnormality in appearance cb, cbc, cbl, cbmf series lbm, lem series te st methods and remarks solvent temperatur e room temperatur e t ype of solvent isopr opyl alcohol cleaning conditions 90s. immersion and cleaning. 17.thermal shock lb, lbc, lbr, lbmf series inductance change:within 10 no signi?cant abnormality in appearance. cb, cbc, cbl, cbmf series lbm series lem series inductance change :within 1 0 q r12 4r7 30 min. 5r6 330 25 min. 390 820 20 min. 101 15 min. t est methods and remarks lem : conditions for 1cycle step temperature duration min 1 ` 40 30 2 85 30 number of cycle 100 cycle recovery at least 1 hr of r ecovery under the standar d condition after the test, followed by the measurement within 2 hrs. lb ? lbc ? lbr ? cb ? cbc ? cbl ? lbm ? lbmf ? cbmf ` 40 85 , maintain times 30min. ,100 cycle recovery at least 2 hrs of r ecovery under the standar d condition after the test, followed by the measurement within 48 hrs. 18.damp heat life test lb, lbc, lbr, lbmf series inductance change:within 10 no signi?cant abnormality in appearance. cb, cbc, cbl, cbmf series lbm series lem series inductance change :within 1 0 q r12 4r7 30 min. 5r6 330 25 min. 390 820 20 min. 101 15 min. t est methods and remarks t emperatur e 60 2 humidity 90 95 rh duration 1000 hrs recovery at least 2 hrs of r ecovery under the standar d condition after the test, followed by the measurement within 48 hrs. lem recovery at least 1 hr of r ecovery under the standar d condition after the test, followed by the measur ement within 2 hrs. 19.loading under damp heat life test lb, lbc, lbr, lbmf series inductance change:within 10 no signi?cant abnormality in appearance. cb, cbc, cbl, cbmf series lbm series lem series inductance change :within 1 0 q r12 4r7 30 min. 5r6 330 25 min. 390 820 20 min. 101 15 min. t est methods and remarks t emperatur e 60 2 humidity 90 95 rh duration 1000 hrs applied curr ent rated curr ent recovery at least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs. lem recovery at least 1 hr of recovery under the standar d condition after the test, followed by the measur ement within 2 hrs.
wound0103_reli-prp5 wound0103_reli_e-01 reliability data this catalog contains the typical speci?cation only due to the limitation of space. when you consider the purchase of our products, please check our speci?cation. for details of each product (characteristics graph, reliability information, precautions for use, and so on), see our web site (http://www.ty-top.com/) or cd catalogs. 20.high temperature life test lb, lbc, lbr, lbmf series cb, cbc, cbl, cbmf series inductance change:within 10 no signi?cant abnormality in appearance. lbm series lem series inductance change :within 10 q r12 4r7 30 min. 5r6 330 25 min. 390 820 20 min. 101 15 min. t est methods and remarks t emperatur e 85 2 duration 1000 hrs recovery at least 2 hrs of r ecovery under the standar d condition after the test, followed by the measurement within 48 hrs. lem recovery at least 1 hr of r ecovery under the standar d condition after the test, followed by the measur ement within 2 hrs. 21.loading at high temperature life test lb, lbc, lbr, lbmf series inductance change:within 10 no signi?cant abnormality in appearance. cb, cbc, cbl, cbmf series lbm, lem series t e st methods and remarks t emperatur e 85 2 duration 1000 hrs applied curr ent rated curr ent recovery at least 2 hrs of r ecovery under the standar d condition after the test, followed by the measurement within 48 hrs. 22.low temperature life test lb, lbc, lbr, lbmf series inductance change:within 10 no signi?cant abnormality in appearance. cb, cbc, cbl, cbmf series lbm series lem series inductance change :within 1 0 q r12 4r7 30 min. 5r6 330 25 min. 390 820 20 min. 101 15 min. t est methods and remarks t emperatur e 40 2 duration 1000 hrs recovery at least 2 hrs of r ecovery under the standar d condition after the test, followed by the measurement within 48 hrs. lem recovery at least 1 hr of r ecovery under the standar d condition after the test, followed by the measur ement within 2 hrs. 23.standard condition lb, lbc, lbr, lbmf series standard test conditions unless speci?ed, ambient temperature is 20 15 and the relative humidity is 65 20 . if ther e is any doubt about the test results, further measurement shall be had within the following limits: ambient t e mperature: 20 2 relative humidity: 65 5 inductance value is based on our standard measur ement systems. cb, cbc, cbl, cbmf series lbm, lem series
wound0103_reli-prp6 wound0103_reli_e-01 precautions this catalog contains the typical speci?cation only due to the limitation of space. when you consider the purchase of our products, please check our speci?cation. for details of each product (characteristics graph, reliability information, precautions for use, and so on), see our web site (http://www.ty-top.com/) or cd catalogs. 1 circuit design precautions operating environment 1 t he products described in this specification are intended for use in general electronic equipment,(office supply equipment, telecommunications systems, m e asuring equipment, and household equipment). they are not intended for use in mission-critical equipment or systems requiring special quality and high r eliability (traf?c systems, safety equipment, aerospace systems, nuclear control systems and medical equipment including life-support systems,) where product failur e might r esult in loss of life, injury or damage. for such uses, contact taiyo yuden sales department in advance. 2 pcb design precautions land pattern design 1 please contact any of our of?ces for a land pattern, and refer to a recommended land pattern of a right ?gure or speci?cations. t echnical consider - ations precautions r ecommended land patter ns surface mounting ? mounting and soldering conditions should be checked beforehand. ? applicable soldering process to those products is re?ow soldering only. 3 considerations for automatic placement precautions adjustment of mounting machine 1. excessive impact load should not be imposed on the products when mounting onto the pc boards. 2. mounting and soldering conditions should be checked befor ehand. t echnical consider - ations 1. when installing pr oducts, car e should be taken not to apply distortion str ess as it may deform the products. 4 soldering precautions wave soldering lem t ype only 1 for wave soldering,please apply conditions meeting the range of the specifed conditions in our catalog or the relevant speci?cations. re?ow soldering lb and cb t ypes 1 for re?ow soldering with either leaded or lead-free solder,the pro?le speci?ed in "point for controlling" is recommended. re?ow soldering lem 1 for r e?ow soldering, please apply conditions meeting the range of the speci?ed conditions in our catalog or the relevant speci?cations. recommended conditions for using a soldering ir on 1 put the soldering iron on the land-pattern. soldering iron's temperature - below 350 duration-3 seconds or less. the soldering iron shoud not come in contact with inductor directly . t echnical consider - ations w a ve soldering lem t ype only 1 components can be damaged by excessive heat where soldering conditions exceed the speci?ed range. re?ow soldering lb and cb t ypes 1 re?ow pro?le 300 250 200 150 100 50 0 pre-heat zone 90 ? 30 sec 30 ? 10 sec 230? minn peak temp: 260 0/ ? 5? 5 sec max 180? 150? recommended conditions for using a soldering iron 1 components can be damaged by excessive heat where soldering conditions exceed the speci?ed range. 5 cleaning precautions cleaning conditions washing by supersonic waves shall be avoided. t echnical consider - ations cleaning conditions if washed by supersonic waves, the pr o ducts might be br oken. 6 handling precautions handling 1 there is a case that a characteristic varies with magnetic in?uence. br eakaway pc boards splitting along perforations 1 planning pattern con?gurations and the position of products should be carefully performed to minimize stress. mechanical considerations 1 t her e is a case to be damaged by a mechanical shock. t echnical consider - ations handling 1 k eep the inductors away fr om all magnets and magnetic objects. br eakaway pc boards splitting along perforations 1 when splitting the pc board after mounting inductors, care should be taken not to give any stresses of de?ection or twisting to the board. 2 board separation should not be done manually, but by using the appropriate devices. mechanical considerations 1 p lease do not give the inductors any excessive mechanical shocks. 7 storage conditions precautions storage 1 under a high temperature and humidity environment, problems such as reduced solderability caused by oxidation of terminal electrodes and deterioration of taping/packaging materials may take place. technical consider - ations storage 1 to maintain the solderability of terminal electrodes and to keep the packing material in good condition, temperature and humidity in the storage area should be controlled. ? recommended conditions ambient temperature 0 40 humidity below 70% rh the ambient temperature must be kept below 30 even under ideal storage conditions, solderability of products electrodes may decrease as time passes. for this reason, le type inductors should be used within one year from the time of delivery. lb type should be used within 6 months from the time of delivery. le type in case of storage over 6 months, solderability shall be checked before actual usage. lem type lb type cb type

▲Up To Search▲

Price & Availability of CBL3225T100KR

	To Download CBL3225T100KR Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .